DscADCalVerify

Verifies the accuracy of the most recent A/D autocalibration process and returns the maximum measured errors. If params->adrange is not set to a valid A/D range code, the function returns the error code DE_INVALID_PARM. The calibration verification process lasts approx. 2-5 seconds.

Function Definition

BYTE dscADCalVerify(DSCB board, DSCADCALPARAMS* params)

Function Parameters

Name	Description
board	The handle of the board to operate on
params	The A/D calibration settings to be used in the verification process

Return Value

Error code or 0.