Table of Contents

Universal Driver Documentation
Main Page || Table_of_Contents || Diamond Systems Website
  1. Main Page
  2. General Driver Issues
    1. Instructions for DOS
    2. Instructions for Windows 95 and 98
    3. Instructions for Windows NT, 2000, XP
    4. Instructions for Windows CE
    5. Instructions for Linux
    6. Instructions for RTLinux
    7. Instructions for QNX 6
    8. Instructions for VxWorks
    9. Compiling with Universal Driver
    10. Calling Universal Driver API Functions
    11. Error Trapping
  3. Common Task Reference
    1. Performing an AD Conversion
    2. Performing an AD Scan
    3. Interrupt-Based AD Sample or Scan
    4. Performing a DA Conversion
    5. Performing a DA Conversion Scan
    6. Interrupt-Based DA Conversion Scan
    7. Performing Digital IO Operations
    8. Checking Interrupt Operation Status
    9. Performing an AD Autocalibration
    10. Performing a DA Autocalibration
    11. AD Calibration Verification
    12. DA Calibration Verification
  4. Interrupt-Based Operations
    1. AD Interrupt Operations
      1. Dump Threshold
    2. DA Interrupt Operations
  5. AD Interrupt Mode Reference
  6. User Interrupts
    1. User Interrupt Types
    2. The User Interrupt Function Interface
    3. Create a User Interrupt Function
    4. Instructions for After and Instead Type User Interrupts
    5. Instructions for Solo Type User Interrupts
      1. After or Instead Modes
      2. Solo Mode
    6. Board-Specific Information for Solo Type User Interrupts
  7. Watchdog Timer
    1. Watchdog Timer API
      1. Definitions of Constants
      2. Watchdog Timer Functions
    2. Application Instructions
  8. DSCUD Function Reference
  9. Data Type Reference
  10. Board Reference
    1. Board Function Lists
    2. Analog IO Ranges
    3. Detailed Board Information
  11. Example Programs
  12. Error Codes
  13. Board Macros


This page was last modified 19:15, 18 Apr 2005.
Copyright (c) 2004 Diamond Systems. All Rights Reserved.