DscQMMSpecialCounterFunction

This function is used to program the alarm registers for counters 1 and 2 of each 9513 chip, to set the initial output state of any counter, or to step (increment / decrement) any counter. The most common use is to set the initial output state of a counter operating in toggle mode.

Function Definition

BYTE dscQMMSpecialCounterFunction(DSCB board, DSCQMMSCF* dscqmm_scf)

Function Parameters

Name	Description
board	The handle of the board to operate on
dscqmm_scf	Structure containing data required for the special counter function.

Return Value

Error code or 0.