Diamond-MM-48-AT

Analog Input

Max Input Channels: 16 (single-ended)
A/D Resolution: 16 bits (1/65536 of full-scale)
Data range: -32768 to +32767 for all voltage ranges
Input Ranges (Bipolar): ±10V, ?5V
Input Ranges (Unipolar): 0-5V
Supported Conversion Triggers: Software, Internal Clock, or External TTL Signal
Maximum Conversion Rate (Software Command): system-dependent, up to 100,000 per second
Maximum Conversion Rate (Interrupt Routine w/FIFO): 200,000 samples per second
FIFO: 2048 samples with programmable threshold (1024 or 256)

Analog Output

Max Output Channels: 4
D/A Resolution: 12 bits (1/4096 of full-scale)
Data range: 0 to 4095 for all voltage ranges
Output Ranges (Bipolar): 0-4.096V

Digital I/O

Max Ports: 8 TTL-compatible DIO lines.

All DIO lines power-up in input mode and have readback capability.

All DIO lines have 4.7K Ohm pull resistors that can be configured for all pull-up or all pull-down with a jumper.

Diamond-MM-48-AT Universal Driver Functions

• dscADAutoCal()
• dscADCalVerify()
• dscADSample()
• dscADSampleInt()
• dscADScan()
• dscADScanInt()
• dscADSetChannel()
• dscADSetSettings()
• dscCounterDirectSet()
• dscCounterRead()
• dscCounterSetRate()
• dscCounterSetRateSingle()
• dscDAAutoCal()
• dscDACalVerify()
• dscDAConvert()
• dscDAConvertScan()
• dscDAConvertScanInt()
• dscDIOClearBit()
• dscDIOInputBit()
• dscDIOInputByte()
• dscDIOOutputBit()
• dscDIOOutputByte()
• dscDIOSetBit()
• dscDIOSetConfig()
• dscGetEEPROM()
• dscSetEEPROM()
• dscSetReferenceVoltages()
• dscGetReferenceVoltages()
• dscGetStatus()
• dscClearUserInterruptFunction()
• dscSetUserInterruptFunction()
• dscUserInt()