| Table of contents |
Max Input Channels: 16 (single-ended) or 8 (differential)
A/D Resolution: 16 bits (1/65536 of full-scale)
Data range: -32768 to +32767 for all voltrage ranges
Input Ranges (Bipolar): ±10V, ±5V, ±2.5V, or ±1.25V
Input Ranges (Unipolar): 0-8.3V, 0-5V, or 0-2.5V
Supported Conversion Triggers: Software, Internal Clock, or External TTL Signal
Maximum Conversion Rate:
This board supports the following programmable input ranges and resolutions:
| A/D Ranges | ||||||
| Code | Range | ADBU | G1 | G0 | Input Range | Resolution (1 LSB) |
| 0 | 0 | 0 | 0 | 0 | ±10V | 305μV |
| 1 | 0 | 0 | 0 | 1 | ±5V | 153μV |
| 2 | 0 | 0 | 1 | 0 | ±2.5V | 76μV |
| 3 | 0 | 0 | 1 | 1 | ±1.25V | 38μV |
| 4 | 0 | 1 | 0 | 0 | Invalid Setting | - |
| 5 | 0 | 1 | 0 | 1 | Invalid Setting | - |
| 6 | 0 | 1 | 1 | 0 | Invalid Setting | - |
| 7 | 0 | 1 | 1 | 1 | Invalid Setting | - |
| 8 | 1 | 0 | 0 | 0 | ±10V | 305μV |
| 9 | 1 | 0 | 0 | 1 | ±5V | 153μV |
| 10 | 1 | 0 | 1 | 0 | ±2.5V | 76μV |
| 11 | 1 | 0 | 1 | 1 | ±1.25V | 38μV |
| 12 | 1 | 1 | 0 | 0 | Invalid Setting | - |
| 13 | 1 | 1 | 0 | 1 | 0 - 8.3V | 153μV |
| 14 | 1 | 1 | 1 | 0 | 0 - 5V | 76μV |
| 15 | 1 | 1 | 1 | 1 | 0 - 2.5V | 38μV |
NOTE: Ranges 9 through 11 are identical to ranges 0 through 2.
Max Output Channels: 4
D/A Resolution: 12 bits (1/4096 of full-scale)
Data range: 0 to 4095 for all voltage ranges
Bipolar Output Ranges: ±10V
Unipolar Output Ranges: 0-10V
Max Ports: 3, bi-directional, programmable in 8-bit groups, TTL-compatible, similar to 82C55 Digital I/O ports on Prometheus require direction to be set with dscDIOSetConfig() before use.
All DIO lines power-up in input mode and have readback capability.
All DIO lines have 4.7K Ohm pull resistors that can be configured for all pull-up or all pull-down with a jumper.
This page was last modified 19:40, 10 Apr 2006.
Copyright (c) 2004 Diamond Systems. All Rights Reserved.